This is an ELC-800R Single-Sensing Water Level Controller for bracket applications with a cable length of 50 feet. The ELC-800R is an automated water level control system with enhanced features and functionality. The ELC-800R Water Level Controller uses proximity sensing technology instead of floats or electrical currents. The revised ELC-800R has an easy-to-program menu. It utilizes a proximity switch which detects the level of water in the pool within a fraction of an inch accuracy. Along with the ability to sense dangerously low water conditions, it will deactivate circulations pumps, protecting them from damage.
The ELC-800R has an integral time delay sequence to avoid cycling due to wave action and has an adjustable feed alarm timer which interrupts water flow in the event of a problem. It has an easy-to-read LCD display which will power down after a 15 minute of no key entry. It will turn back on when you press any key.
The ELC-800R is housed in a watertight NEMA 4X UL94 5V UL flammability rated Polycarbonate enclosure. Any changes to the parameters are password protected so your settings are secure. The ELC-800R has a relay for remote annunciation of an alarm condition. Any of the following will initiate an alarm: Maximum Fill Time Exceeded, Low Water Condition, Level Sensor Problem, and Low Water Sensor Problem.
The ELC-800R Single-Sensing Water Level Controller has been accurately and reliably controlling water to precise levels for over 15 years. This is an excellent choice for commercial pools that need precise and accurate information. AquatiControl has other models available to make it easy to adapt the ELC technology to all bodies of water (surge tank, site glass, deck well, etc.).
