This is a package of six 64 ounce containers of Nature’s Care Quick Cure which removes heavy deposits of non-organic contaminants in pool water, such as dead-algae, pollen, rain pollution, greases, and more. This is a liquid formula that clarifies pool water fast.
Active Ingredient of Quick Cure: Trade Secret.
Directions for Adding Quick Cure to Your Pool:
Avoid super-chlorination for 1 to 2 days after application. Water temperatures under 66 Degrees F may slow product performance. Some sediment may be present in the container which is harmless to the pool and users.
1. If algae is present, it should be eliminated with an EPA registered product before using this product. Once algae is eliminated, this product can help to speed pool recovery.
2. Make sure cap is on tight and shake the bottle thoroughly.
3. Adjust total alkalinity to 100-120 ppm and pH between 7.2-7.6. Avoid adding this product until chlorine or bromine levels are below 5 ppm.
4. With the pump and filter operating, add directly to the pool 16 ounces of this product for every 10,000 gallons.
5. Monitor filter pressure and perform maintenance on filter as needed.
6. If cloudy water persists, repeat treatment after 2 days.
Never mix different products together in the same bottle or pail. Pool may be used immediately after product application.
