This is a package of four 10 pound tubs of Haviland Salt Support Start that is designed to improve water comfort and clarity and is Step One of the Salt Support 3-Step Program. Salt Support Start will make alkalinity and pH more sustainable which helps protect your pool’s equipment, particularly the salt cell generator. Salt Support Start is a dry granular product intended for both saltwater and regular pools.
Active Ingredients of this Product are Proprietary.
Directions for Adding Salt Support Start to your Pool:
1. Do not use this product if your cyanuric acid levels are exceeding 50 ppm. See your dealer for equivalent product with stabilizers.
2. Calculate the total amount of this product to be added first. The initial dosage is 2.5 pounds for every 1,000 gallons of water.
3. With the pump running, introduce 1/2 the total amount of product needed in your pool. Apply the other 1/2 of the product at least 8 hours later. Apply the product to surface area of the pool when outdoor conditions are not windy or breezy. Brush undissolved particles that may have settled to the bottom of the pool. Some product may remain at the surface of the pool water or pool bottom, but the product will dissolve with normal circulation and agitation. Under certain conditions, pool may effervesce for 1 to 3 minutes after product is added to the pool. Pool may be used 15 minutes after particulate has dissolved.
4. Operate pool pump and filter continuously for 24 hours. Once circulated for 24 hours, adjust water balance to their ideal ranges.
5. Test the pool water regularly and as normal with this product in the water. Sanitizer levels need to be maintained at levels indicated on the sanitizer label. Residual of this product should be tested at least once each month and maintained between 30 and 50 ppm.
Never mix different products together in the same bottle or pail. Add this product directly to the pool water. This product may get hard over time, store in a cool dry place in-between uses.
Typically this product does not need to be reapplied during the season. Once in the water this product is only lost due to excessive splash-out, backwashing, or when plenty of new water is added to the pool.
Salt Support’s innovative products ensure that the salt you put into your pool doesn’t create problems you have to take out later. Use of this product will increase sanitizer effectiveness, and provide soft and silky swimming water that is comfortable and enjoyable.
Salt Pools are a big initial investment. Salt Support is your economic insurance policy. After an initial treatment of System Start, your additions of Weekly Boost and Weekly Clean take care of the rest.
